October 06, 2021

In this day of modern training, everyone is all about sculpting a massive, thick back and the biceps that come along with it. Having a nice V-taper accompanied by massive traps shows that you’re serious about your training and can instantly change how people perceive you. Plus, your back is responsible for building good posture and a large portion of common injuries and ailments can be traced to a weak back as the culprit. Therefore, you’re going to learn the best back and bicep workout for strength and mass here and now.

In this article, you’re going to learn:

  • Back and biceps anatomy
  • Functionality of the back and biceps
  • Benefits of having a strong back
  • The best exercises to add size and strength to the back and biceps.

Benefits Of Having A Strong Back

Before we learn what to do to get a strong back, it’s essential to understand why having a powerful back is actually very beneficial to your health. Yes, having a V-taper is accomplished through building your back, and a thick back is a sign of dominance at the gym. However, it can actually improve your quality of life.

Weak back muscles are the root of a large percentage of common ailments that we hear about today. Sore lower back, poor posture, and joint pain, just to name a few. For example, in this study, a woman’s chronic elbow pain was alleviated entirely after completing a program that only focused on strengthening her middle and lower traps.  In fact, weak necks and lack of proper scapular control (study) are two of the more common issues seen.  Still, a weak lower back brings in a host of other issues such as general pain or can be the trigger for other ailments below the waist.  Regardless, if none of this will be an issue after performing this back workout routine, 

Anatomy Of The Back:

The “back” consists of several different muscles which work in unison to manipulate your arms and add stability to your spine. In fact, your back is even active during movements that take place on the anterior of the body, such as bench pressing

Latissimus dorsi


Commonly referred to as “the lats” the latissimus dorsi muscles are two large, flat muscles located on the body’s side. From about mid-back to the lower back, the lats connect directly to the spine. They wrap around to the side and travel upwards when it begins to taper off and links to the upper extremity. 

The lats have a lot of different functions, including:

  • Extension of the shoulder
  • Adduction of the shoulder
  • Horizontal abduction of the shoulder
  • Internal rotation of the shoulder
  • Assists in extension and lateral flexion of the lumbar spine

From an aesthetic perspective, developed lats are responsible for creating the V-taper as they can protrude out to the side of the body. This is why they’re also referred to as “wings” on guys whose lat stick out from their sides

Trapezius muscle


The trapezius muscle; better known as the “traps”. The traps are the one muscle whose size can have a dramatic effect on how jacked you look. If the area between your neck and shoulder is flat, you’re not going to intimidate anyone. However, if you have massive boulders sitting there, you’ll get respect immediately.

The trap’s origin is located from around mid-back on the spine and runs up all the way up the neck and to the skull where it attaches to the external occipital protuberance. This is why it’s also referred to as “the neck muscle”. The traps run towards the side of the body, angling up towards the shoulder where it inserts to the scapula and clavicle. 

Besides making you look swole, the traps are extremely important for producing neck health and creating good posture and vital for scapular control. They are primarily responsible for:

  • Pulling the shoulders up
  • Pulling the shoulders back during scapular retraction
  • Creating a firm base for the scapula
  • Protecting the neck.

Erector spinae

erector spinae

Have you ever looked at a lifter, and they seem to have a massive canyon in the middle of their back? What you’re looking at is a well-developed set of erector spinea muscles sitting on either side of the spine. 

The erector spine is actually a series of 3 major muscles that work to manipulate the spine:

  • Iliocostalis- The iliocostalis sits lateral (outside) to the longissimus and flexes the spinal column to its side. It also extends the spinal column 
  • Longissimus- The longissimus sits in between the iliocostalis and spinalis and is the longest of the three erector spines muscles. It flexes the neck and head as well as extends the spinal column 
  • Spinalis- The spinalis is closest to the spine of all three. It flexes the neck and head as well as extends the spinal column 

This group of muscles sits on either side of the spine and travels up and down its entirety from the sacrum and hips to the base of the skull. Strengthening these muscles is of extreme importance for a healthy spine and posture. 

Rhomboid Major and Minor


The rhomboid major and minor are two small muscles that sit on top of each other and are shaped like rhomboids. For those not familiar with geometry, a rhomboid is a parallelogram with uneven sides and differences in angles.

These muscle origins come from the upper spine and are inserted on the scapula. While small, they play a critical role in scapular control. Both muscles work to manipulate the scapula, press the scapula against the thoracic wall, and retract the scapula. 

Not having strong rhomboids will prevent you from keeping stable scapular control, leading to a cascade of biomechanical deficiencies. Without proper scapula control, the upper extremities cannot operate off a strong base, thus causing irregular movements as well as causing the joints to overcompensate. 

Rhomboids are trained anytime you are retracting your scapula and bracing them. That’s literally what they do, and it wouldn’t be possible without them. This being said, as long as you use good form during your pulling exercises (you better be!), you’ll train your rhomboids. However, it’s always a good idea to throw in some mobility work and light movements to build your rhomboid’s strength and endurance.

Posterior Deltoids

rear delts

While technically the deltoids are your shoulders, there are three heads; the anterior, acromial (sometimes referred to as medial or middle), and posterior.  We are worried about the posterior as it is actually part of the back (hence the name “posterior’) and works in conjunction with the other back muscles. 

The main function of the posterior deltoid is pulling the arm back at various angles.  The good thing is you don’t need to worry too much about including a specific exercise for the posterior delts.  This is because virtually every back exercise that involves the arms hit them already. 

Anatomy & Function Of The Biceps:

Everybody knows the biceps! The biceps are a large two-headed (bi) muscle that sit on the upper arm. These two heads are separated into the long head and short head, which is determined by their origin. The short head originates from the coracoid process of the scapula while the long head originates from the supraglenoid tubercle of the scapula. The two heads then run down the arm and merge together in the mid-region to form one larger muscle mass yet still distinct from one another. In other words, the muscle fibers are never shared. Next, this one muscle mass runs down past the elbow and inserts the forearm’s radial tuberosity and bicipital aponeurosis.


Function of the Biceps

The biceps are unique in that they actually cross two joints; the shoulder and elbow. Specifically, they cross the:

  • Proximal radioulnar joint of the elbow
  • Humeroulnar joint of the elbow
  • Glenohumeral joint of the shoulder

Together, the biceps work to manipulate the arm several ways:

  • Flexion of the elbow while supinated and pronated
  • Supinator of the forearm
  • Forward flexion of the shoulder (This explains why people will bring their elbows forward during curls as their shoulders!)
  • Stabilization of the shoulder during carries (i.e. holding a bag)

The 11 Best Back Exercises For Strength And Mass:

Some may blow the above anatomy and function off, which would be a grave mistake. Identifying the different muscles of a muscle group and their different parts is pivotal in creating the best workout plan. Knowing how the muscles function makes identifying the correct exercises a much easier task.

Therefore, let’s get started in examining the exercises you’ll want to use. We will be using these exercises in our back and bicep workouts.

1. Rack Pull

best back workout

The rack pull is a beast of a movement and is easily the best exercise to load some massive weight. Some uneducated lifters look at the rack pull as a “cheat” deadlift, but those “in the know” look at it as one, independent movement. While the movement is obviously very similar to the deadlift, the bar is set at a raised height of your choosing. Doing so essentially lowers the range of motion, meaning you can lift more weight. More importantly, the rack pull is basically the second half of the deadlift, where the back is more involved. Therefore, we want to set the bar at or slightly above knee level. If the setting above is a couple inches above your knee, choose the setting below the knee of it’s closer. 

While this is going to hit your entire back, it’s an exceptionally amazing exercise for the traps. Multiple studies have found that the trap musculature has the highest EMG activity during the deadlift when the bar travels from the knees to lockout. In order to get high activation, sufficient weight needs to be used so these are best performed with heavyweight, low reps, and high sets.

2. Snatch-Grip High-Pull

back and bi workout

If you pay attention to who has some of the most impressive upper backs, you will notice that Olympic lifters are on the top of the list. This is due to the massive force they are required to generate by their upper back during cleans and snatches. However, Olympic movements are extremely technical and take some good coaching. In other words, they are not suitable for everyone.

The snatch-grip high-pull basically takes out what you need of the movement and throws out the rest. The high pull starts with the bar on the ground like a deadlift would but you take a wider grip, like the snatch. You then explode up using the triple extension and use this power to assist your arms in pulling the bar up to shoulder level. You will need bumper plates for this movement as the bar is then put back on the floor using a controlled fall. These are best performed with low reps, multiple sets, and adequate rest between each rep (NOT SET, REP) as you need time to set up. In other words, take your time 

3. Chin-Ups

best back and bicep exercises

Chin-ups are the king of pulling exercises, and yes, I mean pulling. Many people will point to the pull-up (which is also excellent), but the chin-up wins when looking at the amount of muscle mass used and ability to load. Proof? What’s easier to do; chin-ups or pull-ups? Unless you’re one of the odd ones, you’ll say chin-ups. Many people will incorrectly think that the pull-up is better because it’s more challenging; however, the difficulty of an exercise doesn’t dictate its effectiveness. In reality, chin-ups are easier as you’re using more muscle mass. This means that you can place a greater load on it.  

Further, you’re getting a killer bicep workout as well. Bret Contreas used EMG readings during an at-home analysis of pulling exercises. This included a ton of exercises, from deadlifts to hammer curls. Do you know which exercise caused the greatest EMG readings in the biceps? Weighted chin-ups!

back bicep workout

This was due because the flexion of the elbow goes through a full range of motion, and the body is able to be loaded significantly. Remember, this movement is relative to your bodyweight, so the activation should be similar for everyone who works in the 4-6 rep range; for some, this means weighted for others not.

In fact, chin-ups are such a good movement; you’re going to train them twice as much as the other movements.

4. Barbell Front Shrugs

back and bicep workout for mass

To really finish hitting the traps, your best bet is going to be using barbell front shrugs. Using the barbell forces you to use a pronated grip with your hands out in front of the body. This does two things benefiting optimal trap growth:

  • Increase the range of motion- You will notice that when compared with dumbbell shrugs to the side of the body, there is much more movement involved with front shrugs.
  • Requires you to retract your scapula- One of the reasons there is a larger range of motion is because your shoulders are pulled forward, protracting your scapula. Remember, one of the primary functions of the traps is scapular control. Therefore, not only are you pulling up, you’re pulling up and back as you retract your scapula.

These factors make the barbell front shrug the highest rated exercise when comparing EMG readings. Still the barbell shrug is a movement that allows heavy loading. When performing these, you want to focus on using heavyweight with slow reps. Even though the range of motion is larger with front shrugs, it’s still relatively small. Therefore, you want to use slow reps to get as much time under tension as possible.

5. Dumbbell Bent Over Row

back and bicep workout bodybuilding

Dumbbell bent-over rows are going to destroy your middle back; in a good way. Rack pulls and shrugs take care of your upper back and these dumbbell rows will hit your middle & lower traps while also getting a good workout in with your lats. Further, due to the unilateral nature of the movement, you will naturally get a bit of core work and fight your body from rotating. Regardless, the dumbbell bent-over row is an amazing exercise to train your back.

6. Lat-Pulldown On Your Knees

back and bis workout

The lat-pulldown with a bit of a twist. As the name implies, you’ll perform the lat-pulldown while on your knees. Regular lat-pulldowns are great too but doing them from your knees provides an extra benefit. Because you are not able to brace yourself using your knees, lat pull-pulldowns from your knees require full bracing from your entire body, much like a pull-up. In fact, this study found the EMG readings from lat-pulldown from the knees had the most similar to a pull-up. However, this movement is going to focus on the lats.

7. T-Bar Rows

best back and bicep workout

We love T-Bar rows. While barbell rows are also awesome, T-bar rows tend to allow people to use more weight for some massive backs. Further, as the weight is on a pivot, they seem to cause greater activation than a barbell row where the weight is pulling straight down. If you don’t have a T-bar-specific machine, you can use a landmine set-up; either will work.

8. Standing Back Rows

arm back workout

We already have dumbbell rows and the T-bar row, so there’s no need to add another row; except this standing row. These are performed with a pulley machine and any handle can be utilized; Neural, straight bar, rope. Do yourself a favor and mix it up. Regardless of where these standout, you are performing them standing up, which demands a much higher degree of stabilization in your core (and body in general). 

9. Swimmers

back and bicep workout for muscle growth

Above, we talked about Olympic lifters having great backs. Do you know who else does? Swimmers! Swimmers basically just mimic the freestyle stroke using a load. They’re fairly easy to perform and all you need is a pulley system. The most important aspect of this movement is keeping your arms straight and pulling your arms down; don’t pull your elbows back. 

10. Face-Pull

back and arm workout

Face-pulls are a must for any athlete as they are a prime movement to increase the upper back’s strength and endurance. Still, performing these movements regularly will significantly improve scapular control and your shoulder mobility. Face-pulls are best done with lower weight and high reps. Further, including a good squeeze at full contraction is always a good idea. When you perform this movement, really be mindful about pulling your scapula back.

11. Back Extension

back and bis

Last but not least are back extensions. To be clear, you will have trained your erector spine pretty good already in the above exercises. However, we want some specific movements, so we’ll throw these in as your last back exercise. Still, since your back will already be pretty fatigued, you’ll perform just 1 set to momentarily failure, and that’ll be it.

The 2 Best Bicep Exercises for Your Back & Bicep Workout:

Your biceps will get a good workout with the above plan, but again, we want some bicep-specific (isolation) exercises that target elbow flexion.

1. Bicep 21’s

biceps and back

The biceps 21 do the trick of smashing the biceps really well. Bicep 21’s consist of doing 21 curls in 3 continuous sets of 7.

  • Set 1- Perform a half curl from the bottom position to midway (where your hand is even with your elbow). Perform this 7 times.
  • Set 2- Perform a half curl from the midway position to the top position. Perform this 7 times. 
  • Set 3- Perform full bicep curls 7 times

Because you have already put some heavy loads on your bicep earlier, it’s a good idea to perform some lightweight exercises with maximal reps and bicep 21’s do the tricks.

2. Bicep Rope Hammer Curl

arms and back workout

The 2nd bicep exercise you’ll do are hammer curls with a rope. Performing the exercise with a rope adds just a little bit of extra resistance at the top of the movement, where you pull the rope outwards. This causes a bit higher activation. Again, your biceps have already worked heavily so you’ll want to use lightweight and high reps.

The 4 Best Activation Exercises For Your Back and Bi Workouts:

Before you start slinging heavyweight with the exercises above, you need to get your back warmed up and your muscles activated. Doing so not only lessens the likelihood of getting an injury it can also improve the performance of your session by allowing you to lift more weight. 

Further, this is a great time to perform the mobility and lighter exercises we discussed above. 

1. Bird Dog

should i train back and biceps together

Bird Dogs are one of Stu McGills famous “Big 3” movements for back mobility and health. This movement is performed by getting in a quadruped knee position. You will then move one arm, and its contralateral leg. This is a fancy way of saying “opposite,” so your right arm will move with the left leg and vice versa. Your legs will move backward in a straightening action so your leg will be parallel with your back at the top. The arms will lift up in front of the head like superman. However, for our purpose, you will also want to alternate by lifting it out laterally (the side) as well. This is going to loosen up your back and joints, activate your back muscles, and overall just create a robust core.

2. Scapular Pull-ups

best exercises for back and bi workout

Scapular pull-ups are pull-ups that are only using your scapula. You start this movement in a hang with your shoulder protracted. Now, keeping your arms straight, you will retract your scapula. Hold this position, and then lower yourself down. While this is an excellent exercise for warm-up and activation, it’s also a great way to throw in some grip training which everyone should be doing.

3. Band Pull Aparts

back warm up

Band pull aparts are basically reverse flies using bands. They are going to train your entire upper back and improve scapular control. This will be a great way to start your back training exercise. Still, these are some of the best basic exercises you can do to add work volume to your upper back to improve posture. This is why you want to do these every day.

4. Banded Curls

pull workout

You’ll then move into 1 set of banded curls till 80% failure. Nothing fancy here. You’re just wanting to get the biceps warm, primed and ready to go.

The Best Workout Plan For Your Back And Biceps

Above we went over the best exercises you need to perform to grow the back you want. Now, we just need to schedule them into a workout plan. When writing a program for strength and muscle hypertrophy, there are a few variables we want to consider. 

Training Frequency:

Training frequency refers to how many times a week you’re going to train a specific muscle group; in our case, it’s the back and biceps. The optimal training frequency that maximizes the amount of quality volume seems to be twice a week. Training your back and biceps two times a week will allow you to train with high intensity but also mitigate fatigue.

Rep Scheme:

Often, people make the topic of rep schemes way too complicated. Should I lift heavy for strength or should I lift light for muscle growth? How about just doing both? 

First off, our understanding of the rep spectrum has changed quite a bit over the last few years. Originally we believed that if you want to get strong, you need to lift with a load of >85%1RM. In order to gain muscle, you need to lower the weight to <80%1RM. However, we now know that only one of those is correct, kind of. 

Studies have now shown that for hypertrophy, any weight can be used. Basically, volume is volume regardless if you’re using 3RM or 12RM. However, moderate weights do allow you to produce more volume, so reps of 8-12 are still best, just through different mechanisms. 

However, for strength, you need to use those heavier loads. Some strength can be built with lighter loads when you’re a beginner, but that won’t last long. 

Still, strength and hypertrophy play off each other. A stronger muscle can allow more volume to build a bigger muscle. A bigger muscle has the potential to be a stronger muscle. A stronger muscle can….you get the point.  

Therefore, just do both. The beginning of the session will start with a heavyweight. As you progress, the exercises will get lighter.  

Order Of Exercises:

Your session should always start with the “biggest” exercises and then move down towards your most minor as the session progresses. 90% of the time, this refers to the movement that you will be using the most weight with. An example where this may not be the case are shrugs. Even though you can use a large load with shrugs, the range of motion is small.

back day

The Best Back and Bicep Workout For Strength And Size

You’re going to have two sessions; session A and session B. You want to perform these sessions with 2-4 full days of rest in between. 

For reference: RPE = rate of perceived exertion. We use an 8 RPE for some exercises, which means you have ~2 reps left in the tank (80% failure rate) and you are using a challenging weight of 68-92% 1RM. So, if we write just 8 RPE, that means do as many reps until you reach 80% of your failure rate. If we state 8 RPE and a number of reps, choose a weight load that leaves you with just ~2 reps left in the tank in that rep range.

Back & Bi Warm-Up & Activation (To Do Before Both Sessions):
  • Bird Dog: 1 sets x 10 reps/side
  • Scapular Pull-ups: 2 sets x 5 reps
  • Band Pull Aparts: 2 sets x 8 RPE (rate of perceived exertion)
  • Band Bicep Curls: 1 set x 8 RPE

Session A

Rack Pulls4 sets 4 reps
Chin Ups (weighted if necessary)3 sets8PRE 7-10 reps
Barbell Front Shrugs4 sets4-6 reps
T-Bar Row3 sets6-8 reps
Kneeling Lat-Pulldown3 sets8-12+ reps
Back Extensions1 setFailure
Bicep 212 sets7x7x7

Session B

Snatch Grip High Pulls5 sets 3 reps
Chin Ups (weighted, if possible)3 sets8RPE (4-6 reps)
Dumbbell Bent Over Rows3 sets6-8 reps
Standing Cable Row3 sets8-10 reps
Swimmers (or lat pushdowns)3 sets12+ reps
Back Extensions1 setFailure
Rope Hammer Curls3 sets12-15+ reps

Perform This With Any Program

You can utilize this with any other program you have. Obviously, when you are trying to concentrate on one area, other areas may need to sacrifice some time.

To give you an idea of how this workout can fit into various programs at a frequency of approximately two times a week…

PPL Split

You could do a 5 or 6 day PPL split:

5 Day:

  • Day 1: Push Day (Chest, Shoulders, Triceps Workout)
  • Day 2: Pull Day (Back & Bicep Workout)
  • Day 3: Leg Day (Glutes, Quads, Hamstrings, Core Workout)
  • Day 4: Push Day
  • Day 5: Pull Day
  • Day 6-7: Rest
    – Start following week with Leg Day. 

~6 Day:

  • Day 1: Push Day (Chest, Shoulders, Triceps Workout)
  • Day 2: Pull Day (Back & Bicep Workout)
  • Day 3: Leg Day (Glutes, Quads, Hamstrings, Core Workout)
  • Day 4: Rest
  • Day 5: Push Day (Back & Bicep Workout)
  • Day 6: Pull Day (Chest, Shoulders, Triceps Workout)
  • Day 7: Leg Day (Glutes, Quads, Hamstrings, Core Workout)
  • Day 8: Rest
    – Repeat

Body Part Split

If you have a 4 or 5 day body part split:

  • Day 1: Back & Bicep Workout
  • Day 2: Chest & Tricep Workout
  • Day 3: Legs & Shoulder Workout
  • Day 4: Back & Bicep Workout
  • Day 5: Chest & Tricep Workout

If legs and shoulders are more important for you to build up, you can switch them with chest and triceps. 

All in all, with smart programming, you can make it work. 

Another option, is to do one back and bicep workout per week, and alternate Session A and Session B each week…

For example:

Week 1: Back & Bi Workout Session A
Week 2: Back & Bi Workout Session B
Week 3: Back & Bi Workout Session A
Week 4: Back & Bi Workout Session B
…and so on.

How To Use Progressive Overload For A Massive Back & Biceps

This program will be plenty to keep you progressing for a while using progressive overload. Every week, try to either throw on a little bit more weight OR add some reps. Either one is going to work but we want to address some specifics.

You’ll notice that some of the exercises have a range (6-8). For these, you’ll want to start using 3×6. Then, use the same weight and increase the reps until you can perform 3×8. Once you’re able, increase the weight a bit so you go back down to 3×6. Now, simply repeat this process. 

Your chins are using what’s known as RPE or rate of perceived exertion. This simply refers to how hard something feels. An 8RPE basically means 80% failure rate. However, the two days have two different rep schemes. Therefore, sessions will be heavier and one day will be lighter. You need to use weights (or assistance) to account for these reps. On your 3rd set, you can also take it a bit farther with reps. 

For the smaller exercises, you’re really just trying to get in as much volume as you can. Therefore, these can be brought closer to failure, especially the 3rd set.

Once things begin to get stale, you can simply switch up some of the exercises with similar movements EXCEPT for rack pulls. The only alternative you could swap out for are block pulls. Examples of other swap-outs are;

  • Kneeling Lat Pulldowns→ Lat PulldownsClose Neutral Grip Pull Downs
  • T-Bar Row → Seated Row
  • Dumbbell Row→ Kroc Rows

Doing this will keep things interesting while also adding a slightly different stimulus. That being said, you should run as is (with progressive overload) for 3 months.

Now Go Earn It!

That’s all you need. You have no excuse not to have a monster back now. Hit the gym, keep the intensity up, and watch your back and biceps grow with the best back and bi workout routine for mass and strength.

Related Content:

back day workout

Leave a comment

Comments will be approved before showing up.


Please enter your comment!
Please enter your name here